| This hand-held lightweight portable ANTI-DRONE JAMMERS PTC-UAV8 is elaborately designed as a domestic and international drone-controlling device by adopting advanced technologies both at home and abroad. It is an environment-friendly jammer; it is designed to disturb low-altitude flying drone's remote control signals without influence on surrounding signals such as those for mobile communication, communication base station, car remote control and so on. The jammer is configured with 8 frequencies signals (remote control signals+WIFI2.4G/5.8G +GPS ) to intercept drone's remote control signal. It has been reported by China CCTV. | Channel | Working Frequency | Channel Power(±3dBm) | | CH1 | 420-438MHz | 13W | | CH2 | 860 - 930MHz | 13W | | CH3 | 1080 - 13800MHz | 30W | | CH4 | 1400-1440MHz | 13W | | CH5 | 1550-1620MHz | 30W | | CH6 | 2400 - 2500MHz | 30W | | CH7 | 5150 - 5250MHz | 30W | | CH8 | 5725 - 5850MHz | 30W | | Total Working Channels | 8 channels | | Total Working Output | 170W | | Shielding distance | 100-2000meters, depend on the environment | | Technology Solution for option | VCO, DDS, AI | | Battery | 40 minutes | | Antenna | Built-in High gain Directional antenna or External Panel Anennas for option | | Power consumption | 500W | | Weight | 8Kg | | Size(Length × width × height) | 1010mm×320mm×50 mm | | Humidity | 5%-95% | | Operation temperature | -20 to +50℃ | Features and Advantages 1. Ultrahigh frequency board-band jamming technology 2. Wide coverage of 8 Frequencies with high effective power 3. Long jamming Range up to 2km. 4. Light Weight and Friendly use 5. Built-In 40-minutes battery operation and high gain Directional Antennas 6. Effective segmentation to block each drone controlled signals. 7. Imported chips, slow start circuit design can avoid the sparking phenomenon caused by mechanical switch, high integration and stable operation.
8. Perfect self-protection function, when the device is overheated, over output -power, standing wave and other fault alarms, the drone signal jammer will automatically cut off the failed module to avoid damage to the drone shield. How to Use: Put the Drone jammer to point at your target drones, using the gun-shaped antenna holder (with the antennas on it), it will cut off the signal between the controller and the drones. The drone will not be able to receive any control signals or transmit any camera signals back to the controller and drop down. The drone will be officially MIA (missing in action). 
| 
